Filter
Top Products
41
FAQs, etc.
Technical Information
DCIM
P1000001.JPG
P1000002.JPG
P1000003.JPG
P1000004.JPG
100_PANA
Data format for Card browsing
Created automatically
Note
Caution
•
A JPEG image modified with a PC cannot be displayed.
•
Partly degraded files might be displayed at a reduced resolution.
•
Folder structure viewed in PC
•
The folder and file names may be different depending on the digital camera used.
•
Suitable SD Memory Cards. Please confirm the latest information on the following website.
http://panasonic.co.jp/pavc/global/cs (This site is in English only)
Photo: Still images recorded with digital still cameras compatible with JPEG files of DCF* and EXIF
standards
Data format: Baseline JPEG 160X120-2,560X1,920 pixels (Sub-sampling: 4:4:4, 4:4:2 or 4:2:0)
Max. number of files: 9,999
Image resolution: 8 x 8 to 5,120 x 3,840
* DCF (Design rule for camera file system): A Japan Electronics and Information Technology Industries Association’s standard
DIGITAL AUDIO OUT terminals
You can enjoy your home theater by connecting a Dolby Digital (5.1 channel) decoder and “Multi Channel” amplifier
to the DIGITAL AUDIO OUT terminals.
Caution
•
External speakers cannot be connected directly to PROG.OUT terminals.
•
When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC
channel is selected, the output will be PCM.
3-digit folder number + 5-digit arbitrary characters
4-digit arbitrary characters + 4-digit file number
•
Usable characters: 1-byte “a to z”, “A to Z”, “0 to 9,” and “_”
Control with HDMI “HDAVI Control”
HDMI connections to some Panasonic equipment allow you to enjoy the easy playback or home theater.
•
Setup the equipment to enable this function. Read the manual of the equipment.
•
Switch the TV unit on again with the equipment on when connection or setup is changed.
•
This function may not work normally depending on the equipment condition.
•
The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.
•
Image or sound may not be available for the first few seconds when the playback starts.
•
Image or sound may not be available for the first few seconds when Input mode is switched.
•
Volume function will be displayed when adjusting the volume of the equipment.
•
Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.