Filter
Top Products
18 19
Viewing
Watching Videos and DVDs
Cards: Notes and Cautions
VCR DVD
VCR Record Record
-
Open/Close
-
Skip Reverse/Forward
Rewind/Fast Forward Reverse/Forward
Stop Stop
Pause Pause
Play Play
-
Input select
[1] TV
[2] Component 1
[3] Component 2
[4] HDMI 1
[5] HDMI 2
[6] Video 1
[7] Video 2
[8] Video 3
Video 1
VCR
Press corresponding NUMBER
key on the Remote Control to
select the input of your choice.
Press to select the input of your
choice, then press “OK”.
•
If during selection, no action
is taken for several seconds,
the Input selection menu is
exited.
SD Card: Notes and Cautions
Message Meaning
Card Warning Messages
Cautions in handling card :
Is memory card in?
•
The card is not inserted or this unit does not support the format.
•
Do not remove the card while the unit is accessing data (this can damage card or unit).
•
Do not touch the terminals on the back of the card.
•
Do not subject the card to a high pressure or impact.
•
Insert the card in the correct direction (otherwise, card may be damaged).
•
Electrical interference, static electricity, or erroneous operation may damage the data or card.
•
Back up the recorded data at regular intervals in case of deteriorated or damaged data or erratic
operation of the unit. (Panasonic is not liable for any deterioration or damage of recorded data.)
No file
•
The card has no data or this type of data is not supported.
Watching Videos and DVDs
Some Panasonic equipment connected to the TV unit can be operated with the remote control.
Programming the remote control is necessary to operate other manufacturers’ products. (p. 33)
3
With VCR or DVD turned On
Switch to external input
Press to display the Input select menu.
1
2
Select the input mode
or
select
enter
(example)
Operate
the VCR or DVD with the remote control
Note
•
For details, see the
manual of the
equipment
or ask your local
dealer.
•
The terminal and label of the connected device is
indicated.
To label each of the connected devices (p. 30)
(For other operations, see p. 36.)
Ŷ
Press to return to
TV
(Initial screen)
Label Terminal
[example]