Panasonic TH-42PX60X Flat Panel Television User Manual


 
8 9
Quick Start Guide
Accessories/Options
B
D
2
Setting-up
Lift the television unit above the pedestal,
with the back of the television unit on
the same side as the pedestal Label.
Then align the holes in the television unit
(bottom) with the poles of the pedestal and
lower the television unit into place.
Use the assembly screws
B
(M5 x 30) to
fasten securely.
3
Stopping the plasma television from falling over
Pedestal
Pole
* Place pedestal on
a horizontal and
level surface.
Accessories/Options
Ŷ
Securing to a base
Ŷ
Securing to a wall
Fasten with wood screws in the holes in the
back edge of the wood worktop. If there are
no holes, first drill them in the middle of the
thickness of the wood worktop, and then
fasten the strap with wood screws.
* Remove the screws at
both top corners on
the rear side of the
plasma TV, and attach
the clamps
4
to the
plasma TV using the
removed screws.
Front
Screws on main body
Wood Worktop
* Use strong wire
or chain which is
commercially available
to secure the plasma
television to a solid
area of the wall or a
pillar.
Securing method
* The plasma TV must be fastened to both the base and the wall.
Front
Rear side
Accessories for pedestal security
For 37'', 42'', 50'' Plasma television
1
Band (2)
2
Screw (2)
3
Wood screw (2)
4
Clamp (2)
Nominal diameter
4 mm x 12
Accessories for pedestal security
For 58'' Plasma television
1
Band (4)
2
Screw (4)
3
Wood screw (4)
4
Hook (2)
Nominal diameter
4 mm x 12
5
Hook securing
screw (2)
M8 x 35
Fasten with wood screws in the holes
in the back edge of the wood worktop.
If there are no holes, first drill them in
the middle of the thickness of the wood
worktop, and then fasten the strap with
wood screws.
* Use a flat-head screwdriver
to remove the caps at the left
and right top on the rear side
of the plasma TV, and attach
the hooks
4
to the plasma
TV using the hook securing
screws
5
. (Keep the caps
you have removed in a safe
place.)
Hook securing
screw
5
• Securing method
Ŷ
Securing to a base.
Ŷ
Securing to a wall.
Wood
Worktop
Hook
Hook
* Use a strong wire or chain
which is commercially
available to secure the hooks
4
to a solid area of the wall
or pillar.
Front
Arrow mark
Pole
Hole for installation
pedestal
Bottom view
Label
Television unit