Filter
Top Products
10 11
Quick Start Guide
Connection
IN OUT
ANT IN
ANT OUT
S-Video
OUT
Video
OUT
Audio
OUT
L
R
Video
IN
Audio
IN
L
R
Snap open
Snap shut
Back of the TV unit
•
Do not bundle the RF cable and AC cord
together (could cause distorted image).
•
Fix cables with Cable clampers as necessary.
•
When using the optional accessory, follow the
option’s assembly manual to fix cables.
Remove from the TV unit
Push both side hooks
and pull out
Cable clamper
AC cord
•
Bundle cables with the Cable clamper on the left
side.
•
Fasten the AC cord with the Cable clamper on
the right side.
Bind all cables to the plasma television with the
Cable clamper.
Cable Binding Instructions
Ŷ
Attaching the Cable clampers
Ŷ
Cable Binding Instructions
Connection
Ŷ
Watching TV
Back of the unit
Cable BOX
S-Video signals have
priority.
or
VHF/UHF aerial
DVD Recorder /
VCR
Fastener
•
To unfasten
AC cord
(Connect after
all the other
connections.)
Note
•
All cables and external equipment shown in this book are not supplied with the TV.
•
For additional assistance, visit us at : www.panasonic.com
www.panasonic.ca
•
The S Video input will override the composite video signal when S Video cable is connected.
Connect either S Video cable or Video cable.
•
When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be
output through the PROG.OUT terminals.
•
Some programs contain a copyright protection signal to prevent VCR recording.
•
Set the TV channel to CH3 or CH4 for using Cable Box Connection.
Video recorder
with TV Tuner
To record TV shows
or