Panasonic TH-P50VT30M TH-P42VT30V TV Antenna User Manual


 
How to Use the Menu Functions
40
Setup
Item
Adjustments / Configurations (alternatives)
PC Setup
Input Resolution
Switches to a wide view
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
Options change depending on signals
Clock Sets to the minimum level if noise occurs.
H-pos
Adjusts horizontal position
V-pos
Adjusts vertical position
Clock Phase
Eliminates flicker and distortion
Adjust after Clock adjustment
Set to the minimum level if noise occurs
Sync
• H & V
• On Green
PC sync signal type
[H & V]: by the horizontal and vertical signals from your PC
[On Green]: Sync on Green sync from your PC
Reset to Defaults Press the OK button to reset the PC Setup settings to the default
Timer
Item Adjustments / Configurations (alternatives)
Off Timer
• Off
• 15 / 30 / 45 / 60 / 75 /
90 minutes
Sets the time until the TV automatically goes into Standby mode
Auto Standby
• Off
• 2 / 4 hours
Sets the time the TV automatically goes into Standby mode when no
operation is performed for the selected times
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
The notification message will appear 3 minutes before going into Standby mode.