Panasonic TH-P50VT30M TH-P42VT30V TV Antenna User Manual


 
Accessories / Options
8
Securing the TV
Insert the pole into the TV, and then fasten securely
with the assembly screws .
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
Carry out the work on a horizontal and level surface.
B
E
Hole for
pedestal
installation
(View from the bottom)
Arrow mark
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screw from the cover.
4 Pull out the cover.
5 Remove the assembly screws from the pole.
Adjust the panel to your desired angle
(View from above)
15°
(
TH-P42VT30M
TH-P42VT30P
TH-P42VT30Q
TH-P42VT30V
)
10°
(
TH-P50VT30D
TH-P50VT30K
TH-P50VT30M
TH-P50VT30P
TH-P50VT30Q
TH-P50VT30T
TH-P50VT30V
)
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full
rotation range.
Do not place any objects or hands within the full rotation range.
Optional accessories
Please contact your nearest Panasonic dealer to purchase the recommended optional accessories.
For additional details, please refer to the manual of the optional accessories.
Wireless LAN
Adaptor and
Extension cable
Please refer to the following web site for usable Wireless LAN Adaptor.
(English only)
http://panasonic.jp/support/global/cs/tv/
Additional information for Wireless LAN Adaptor and access point may also be on
this web site.
Caution
To use the Wireless LAN Adaptor, an Access Point needs to be obtained.
It is recommended to use the Wireless LAN Adaptor with the extension cable.
To avoid radio wave interference, keep the TV away from the devices such as
other wireless LAN devices, microwaves and the devices that use 2.4 GHz and
5 GHz signals when using the Wireless LAN Adaptor.
Otherwise malfunction may occur.
Depending on the area, this optional accessory may not be available.