Filter
Top Products
Manual Program
ACTION
Displays and Exits Menus
Located On Remote Control
Highlight Desired
iI<vo,i vo,>, e n0 tu,;isW,"a%
Selects or Adjusts
Features When
Menu is Displayed
Manual Programming -This feature allows
you to select which channels are placed into Channel
Scan memory so when you press the CHANNEL UP or
DOWN button only those channels you desire will be
accessed.
1. Press the ACTION button to display the Main Menu.
2. Press the CH UP/DOWN and VOL LEFT/RIGHT
buttons to highlight the Set Up Icon.
3. Press the ACTION button to display the Set Up
Menu.
SET UP
I SET TIME 8 : 23 AM
SET DAY SUN
MODE CABLE
AUTO PROGRAM NO
4. Press the CH UP or DOWN button to highlight
"MANUAL PROGRAM".
5. Press the VOL LEFT or RIGHT button to display
Manual Programming menu.
SETUP
I ENTE_HANNEL
I_ TO ADD
<1 TO DELETE
6. Use Remote Keyboard numbers "0 through 9"orCH
UP/DOWN buttons to select channels.
7. Press the VOL RIGHT button to add channel(s) to
memory (blue). Press the VOL LEFT button to
delete channel(s) from memory (yellow).
8. Repeat Steps 6 and 7 to continueadding or deleting
channels.
9. Press the ACTION button twice to exit.
- 37 -