Filter
Top Products
Advanced
TV
MENU TV/AV
OK
Picture menu
Sound menu
Main menu
Setup menu
Access
STR F / TV/AV
STR F / TV/AV
16
17
Editing and Setting Channels
Set
manually
Manual
tuning
The current channel settings can be changed according to your needs and reception conditions.
For Auto tuning, see p. 18.
■
To exit
TV/AV
•
Editing and Setting Channels
Display the menu
1
2
Select "Setup menu"
3
Select "Tuning menu"
4
Select the item
5
Access, change or adjust
MENU
access
select
Edit
Sound
system
Edit
Colour
system
Small
adjustment
Fine
tuning
Skip the
programme
Skip
OK
Select the programme number
and search through the channel
F
(Press until "Tuning mode"
appears)
or
/
(Access Tuning menu)
F
(Press until "Auto tuning"
is reached)
or
/
(Searching channels)
For Auto tuning, using the
buttons on the unit
("Tuning mode" on p. 7)
■
To return to TV
TV/AV
Allows you to change the sound system used for a programme channel.
(4.5MHz / 5.5MHz / 6.0MHz / 6.5MHz)
Select the channel you want to adjust Set this function
OK
Lets you select the correct transmission standard for the transmission signal being received. (p. 15)
(Auto / PAL / SECAM / NTSC 4.43 / NTSC 3.58)
Select the channel you want to adjust
Set this function
OK
•
Normally, select "Auto"
For the small adjustments to the tuning of an individual channel (useful for example when weather conditions are
affecting reception quality of a programme)
Select the channel you want to adjust Set this function
OK
•
To cancel Fine tuning, tune again by Manual tuning
Store
search
Programme
number
Channel
Repeat
and
Note
•
If a VCR is
connected with
only the RF
cable, select
programme
number "0".
•
The programme
number blinks.
To freely change settings after Auto setup
F
(Press until "Tuning mode" appears)
or
/
(Access Tuning menu)
F
(Press until "Manual tuning" is reached)
or
/
(Access Manual tuning)
TV/AV
(Programme, Channel (select), Sound system)
or
/
(Change programme or start searching
channels)
STR
(Store)
-
(Repeat)
For Manual tuning, using the buttons on the unit
("Tuning mode" on p. 7)
■
To return to TV
F
4. 5MHz
10
Manual tuning
-
, + : Search
TV / AV : Move cursor
STR : To store
F : To exit
STR F
-
/ + / TV / AV
Programme number
(Blinks)
Channel
Sound system
(Blinks)
■
To return to the
previous screen
MENU
select
programme
When the desired
channel is found,
press OK to
store.
Control with HDMI
Off timer
Setup menu
Child lock
Blue back
Ch colour set
On
Off
Off
On
Teletext
TOP
Tuning menu
Access
Sys select
Tuning menu
Manual tuning
Sound system
Colour system
Fine tuning
Asia/M.East
5.5MHz
Auto
Access
Auto tuning
Access
Skip
Off
access
select
select
next
Manual tuning
10
Return
Exit
Search down/up
Store Programme down/up
Select the programme numbers you want to skip Set "Skip" to "On"
OK
To skip another channel, select the channel number via channel number buttons (if selecting two digits channel,
you must fi rst press the -/-- key then the channel digits).
•
If you intend to change the skip settings for a number of channels, write the channels’ numbers on a piece of
paper before you begin.
For skipping the programme numbers on which no TV stations are tuned