Filter
Top Products
8
9
Preparations
Return
Exit
Change
Select
Menu
Volume
Bass
Treble
Balance
Surround
Sound menu
Off
Headphone volume
Music
ANT
ANT
RF OUT
RF IN
AUDIO
OUT
VIDEO
OUT
COMPONENT
Y
AV 2
IN
MONITOR
OUT
HDMI 1
AUDIO IN
AV 1
IN
VIDEO
VIDEO
S VIDEO
L/MONO
-
AUDIO
-
R
L
-
AUDIO
-
R
P
B
/C
B
P
R
/C
R
12
AV IN
Turn the TV On with the On / Off switch
1
Need help
with operations?
(example: Sound menu)
On-screen operation
guide will help you.
Initial SetupConnection
These steps are not necessary if the setup has been completed your local dealer.
•
Initial Setup
•
Connection
Note
•
To obtain optimum quality picture and sound, an Aerial, the correct cable (75
Ω
coaxial) and the correct
terminating plug are required.
•
If a communal Aerial system is used, you may require the correct connection cable and plug between the wall
Aerial socket and the TV.
•
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and the accessories required.
•
Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
DVD Recorder or VCR
75
Ω
Coaxial cable
VHF / UHF aerial
Rear of the TV
Mains lead
■
Watching TV
(Connect after
all the other
connections.)
This TV has been pre-programmed in the factory to
the following Australian TV channels.
2
3
If your location does not receive these channels
please go to ”Auto Tuning” section (p. 18-19).
External equipments and cables shown in this manual are not supplied with this TV.
Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
Programme No. Channele No.
22
77
99
10 10
28 28
31 31
From now on you can use the remote control to turn
On the unit or turn the unit to standby mode.
•
If you turned the TV Off during Standby mode last
time, the TV will be in Standby mode when you turn
the TV On with MAINS power On / Off switch.