Filter
Top Products
6
7
Preparations
STR F / TV/AV
+
-
+
-
1 2 3
4 5 6
7 8 9
0
TV
VCR DVD
MENU
REC
TV/AV
N
R-TUNE
OK
ASPECT
SURROUND
STILL
F.P. INDEX
TV/TEXT
HOLD
Optional accessories
1 2 3
4 5 6
7 8 9
0
TV
VCR DVD
MENU
REC
TV/AV
N
R-TUNE
OK
ASPECT
SURROUND
F.P. INDEX
TV/TEXT
HOLD
STILL
5
10
20
20
Installing remote's batteries
Batteries for the Remote
Control Transmitter
(2)
•
R6 (AA)
Identifying ControlsAccessories / Options
Pull
open
Hook
Note the correct
polarity (+ or -)
Close
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control unit.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or breakup batteries.
Remote Control
Transmitter
•
N2QAJB000121
Function
select
Selects programmes in sequence
On / Off
switch
Power lamp
Remote control signal receiver
Store setting (p. 16)
Switches TV/AV
Volume / Contrast / Brightness / Colour / Sharpness
/ NTSC-Tint (Tint) / Bass / Treble / Balance / Tuning
mode (p. 16)
Standard accessories
•
Identifying Controls
•
Accessories / Options
Check that you have the accessories and items shown
Operating Instructions
( )
Standby: red
On: green
( )
Wall-hanging bracket
(vertical)
•
TY-WK23LR2W
Please contact your nearest Panasonic dealer to
purchase the recommended wall-hanging bracket.
For additional details, please refer to the wall-hanging
bracket installation manual.
1 2
Remove two screws
Pull out the plastic portion
Remove four screws
Pull out the metallic portion
Foam mat or thick soft cloth
WARNING
•
Failure to use a Panasonic bracket or choosing to mount
the unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional
installer mount your unit will void your warranty.
•
Always be sure to ask a qualifi ed technician to carry out
setup.
Incorrect fi tting may cause equipment to fall, resulting in
injury and product damage.
•
Do not mount this LCD Television directly below ceiling
lights (such as spotlights, fl oodlights or halogen lights)
which typically give off high heat. Doing so may warp or
damage plastic cabinet parts.
How to remove the TV-Stand
1
2
How to use the stand
B.A.T.S. (Backlight Automatic Tracking System) sensor
(senses brightness to adjust picture quality in "Auto" Menu) (p. 14)
Adjust the LCD panel to your desired angle.
Within about 23 feet (7 meters) in front of the TV set.
Switches TV to On or Standby
(On / Off switch in On position)
Surround On / Off (p. 14)
Changes aspect ratio (p. 10)
Normalizes (p. 14)
(Resets settings)
Selects programmes in sequence
Teletext
(p. 12)
Viewing a favourite teletext page
(p. 13)
MENU
Stereo / Bilingual Sound Selection
(p. 26)
Sound mute On / Off
VCR / DVD operations (p. 11)
Volume
OK
Teletext Index
(p. 13)
Still Picture (p. 10)
Coloured buttons
(used for various functions)
(for example, see p. 10, 11, 12 and 13)
Off timer (p. 14)
Switches TV/AV
(To watch videos or DVDs) (p. 11)
Changes programme (p. 10)
Recall (p. 10)
Press once to activate and press again to
clear on screen display (osd) information
for example, Programme number, Stereo
mode, Aspect mode, Sound menu and
Picture menu.
Teletext Hold (p. 13)
R-TUNE
Press to switch to previously viewed
channel.
( )
(
(
(View from the top) (View from the side)