Filter
Top Products
10
11
Viewing
1 2 3
4 5 6
7 8 9
0
TV
TV/AV
OK
STILL
ASPECT
HDMI2
HDMI1
HDMI2HDMI1
TV
VCR DVD
REC
TV/AV
OK
1 2 3
4 5 6
7 8 9
0
Watching TV
1
2
Turn power on
On / Off switch on unit should be On.
•
Watching Videos and DVDs
•
Watching TV
Volume
Watching Videos and DVDs
With the equipment turned On
Select the external input
1
It is possible to connect a variety of external equipment to the TV unit. Once the equipment is connected,
use the following procedure to view the input.
To connect the equipment (p. 23)
TV/AV
2
Select the connector
connected to the equipment
AV1
AV2
(AV mode screen)
Note
•
If the external equipment has an aspect adjustment
function for a connected TV, set to "16:9".
•
For details, see the manual of the equipment or ask your
local dealer.
•
You can also select an AV source using the TV/AV button
on the top panel of the TV.
■
To return to TV
TV/AV
•
example: AV1
red
HDMI2
blue
green
red
yellow
HDMI2
blue
Displays
the selected
connector
VCR DVD
VCR / DVD switch
Select VCR / DVD
Standby
Set to Standby mode / Turn on
Play
Playback VCR / DVD
Stop
Stop the operations
Rewind / Slow-motion / Search
VCR: Rewind, review (during playback)
DVD: Play at slow speed
Press and hold to search backward
Fast-forward / Slow-motion / Search
VCR: Fast-forward, cue (during playback)
DVD: Play at slow speed
Press and hold to search forward
Pause
Pause / Restart
Programme Up, Down / Skip
VCR: Select programme
DVD: Skip the track or title
REC
Record
Start recording
Some Panasonic VCR and DVD equipment
connected to the TV unit can be directly
operated with the remote control.
Note
•
After setting, execute operation confi rmation. If
there is no operation, set a different code.
•
The respective VCR / DVD code is cancelled
when battery has been exchanged. Set it again.
•
Depending on the model, operation may not be
possible.
•
In some cases, new products may not be
operative.
HDMI1
■
Other Useful Functions (Operate after )
STILL
Freeze / unfreeze picture
Picture
Still
Display status
information
Display/hide Ch number/AV, status information on screen.
•
Press once to activate and press again to clear on screen display
(osd) information for example, Programme number, Stereo mode,
Aspect mode, Sound menu and Picture menu.
Change
aspect
ratio
16 : 9
ASPECT
•
Each press changes the mode.
(16:9 / Just / 4:3 / Zoom1 / Zoom2 / Zoom3)
Change the aspect ratio (p. 25)
While the bar is displayed
red
green
•
Press the STILL button to freeze the picture.
(TV/VIDEO input only. Component/HDMI
input does not freeze.) Press again to return
to watching the current programme.
1 2 3
4 5 6
7 8 9
0
Select a programme number
up
down
or
You can select the numbers directly by pressing
Programme Number button and the two digit
numbers by pressing Two Digit button ( )
and Programme Number buttons.
Programme Number 8 .....
8
Programme Number 12.... ,
1
,
2
■
CH select via number button
■
pressing the Ch up/down button , you can quickly cycle
through the pre-programmed channels.
■
Remote control setting
VCR DVD
1 2 3
4 5 6
7 8 9
0
VCR
Manufacturer Code
Panasonic / National 10,11,12,13
DVD
Manufacturer Code
Panasonic 70, 71
Switch to select VCR or DVD
While pressing the VCR /
DVD Power button, press the
manufacturer code (enter the
two digit code), and press the
VCR / DVD Stop button.
Programme No. Channel No.
22
77
99
10 10
28 28
31 31