Panasonic TX-32LX500A Flat Panel Television User Manual


 
14
Tuning
Auto tuning automatically retunes your TV. This feature is useful if, e.g., you move house and wish to retune your
TV to receive the local stations.
Press the MENU button.
Move to choose Setup menu.
Access Setup menu.
Move to choose Tuning menu.
Access Tuning menu.
Move to choose Auto tuning.
Access Auto tuning.
The TV will search for, locate, store and then sort
into order your local stations.
Once this operation is completed the TV will display
the programme now stored on programme position 1.
Note:
If you exit the procedure after this point and before
Auto tuning is complete, no station information will
be stored. Restart and complete the Auto tuning
procedure so that the TV is retuned.
Press the EXIT button at any time to go back to watching
TV (please read the Note in the above procedure).
MENU
OK
TV
123
456
7
89
0
OK
AUTO SETUP IN PROGRESS
SEARCHING : PLEASE WAIT
12
Return
Exit
Press F until Tuning mode is reached.
Press
/ or +/
to access Tuning mode.
Press F until Auto tuning is reached.
Press
/ or +/
to start search.
Press TV/AV at any time to exit the Tuning menu.
It is also possible to use the control panel buttons on the front of the TV to tune individual programme positions:
Notes:
If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, refer to the
Colour system selection on page 13.
After the Auto tuning is finished, press the Programme Number up button to confirm the tuning condition for each
Programme Number. If some Programme Numbers are unused, it is possible to skip such Programme Numbers.
Please refer to the Skip function on page 13.
STR F TV/AV
Auto tuning
EXIT
Auto tuning (via front panel)