Filter
Top Products
35
VCR DVD
Notes:
• After setting, execute operation confirmation. If there is no operation, set a different code.
• The respective VCR / DVD code is cancelled when battery has been exchanged. Please set it again.
• Depending on the model, operation of VCR’s or DVD’s of the manufacturers listed above may not be possible.
• In some cases, new products may not be operative.
• It will not operate with other than the above manufacturers.
Remote Control Operation is possible for the Panasonic VCR’s and DVD’s equipment.
After completion of setting, execute the various operations after pressing the VCR / DVD selection switch.
Switch to select VCR or DVD.
While pressing the VCR / DVD Power button, press the manufacturer
code (enter the two digit code), and press the VCR / DVD Stop button.
123
456
789
0
TV
123
456
7
89
0
OK
REC
VCR DVD
VCR
Panasonic/ National 10,11,12,13
Manufacturer Code
DVD
Panasonic 70, 71
Manufacturer Code
Stereo / Bilingual Sound Selection
When you receive the stereo / bilingual sound system, sound output modes can be selected by pressing
the Stereo / Bilingual Sound Selection button.
Notes:
• If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO automatic switching
occurs, it is recommended you switch from STEREO to MONO.
• Even when the contents of the receiving signal undergo changes, selection mode is kept intact.
• When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO position, using
the stereo / bilingual sound selection button.
• DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.
Type of broadcast
Mode Indicator
Type of broadcast
Mode Indicator
Regular broadcast
(Standard Audio)
NICAM STEREO
STEREO
Mode Indicator
NICAM .......Used in New Zealand, Singapore, Hong Kong etc.
I
No Indicator
Regular broadcast
(Standard Audio)
No Indicator
II
I
I
II
I
II
NICAM DUAL MONO
(MAIN I / SUB II )
BILINGUAL or DUAL MONO:
MAIN I / SUB II
A2(German) .......Used in Australia, Malaysia etc.
Audio Signal
STEREO MAIN I SUB II MONO
Regular + NICAM MONO I
(MAIN I )
Remote control setting