36
Snowy Picture
Multiple Image
Interference
Normal Picture
No Picture
No Colour
Poor or Distorted
Picture
Normal Picture
Noisy Sound
Normal Sound
Normal Sound
Normal Sound
Noisy Sound
No Sound
No Sound
Weak or
No Sound
Weak or
distorted sound
Troubleshooting
If there is a problem with your LCD TV please refer to the table below to determine the symptoms, then carry out the
suggested check. If this does not solve the problem, please contact your local Panasonic dealer, quoting the model
number and serial number (both found on the rear of the TV).
Symptoms
Checks
There may be red spots,
blue spots and green
spots on the screen
Aerial location, direction or connection
Aerial location, direction or connection
Electrical appliances
Cars / Motorcycles
Fluorescent lights
Volume level
Sound mute switched on.
TV set to AV mode
Not plugged into AC outlet.
Not switched on.
Picture / Sound controls set at minimum levels.
Check if in Standby mode.
Retune Channel (s).
Sound reception may have deteriorated.
Sound system
Picture Sound
Colour Controls set at minimum levels.
Colour system
This is a characteristic of liquid crystal panels and is not a
problem. The liquid crystal panel is built with very high precision
technology giving you fine picture details. Occasionally, a few
non-active pixels may appear on the screen as a fixed point of
blue, green, or red.
Please note this does not affect the performance of your LCD.
HDMI cable is not connected securely.
Turn the power supply of the TV and connected equipment off
then turn on.
Check compatibility of input signal from the connected equipment.
The connected equipment must be EIA/CEA-861/861B compliant.
Change the audio setting of the connected equipment to L.PCM.
Check the setting of HDMI input in Sound menu.
If the problem is due to the digital audio connection, change to
the analogue audio connection.
Poor Video.
(Snow noise, no picture, picture runs, etc.)
Poor Audio.
The error message appears.
The SD card cannot be used even when it is formatted.
Please consult an Authorized Service Center.
Please consult an Authorized Service Center.
H
D
M
I