Panasonic TX-32PB50F, TX-28PB50F CRT Television User Manual


 
25
Press the SOUND menu button
Move to Surround menu option
Access Surround menu
Move to chosen menu option
Adjust chosen option or access chosen menu
Press the TV/AV button at any time to go back to watching TV
If a DTS / Dolby Digital input is detected the Surround
menu options instantly change --- Surround mode is
notavailable.EnsurethattheDigitalAudiooptioninthe
SOUND menu is set to the correct AV input (see page
9 for details). A message displayed in the centre of the
screenshowsw hetherthesignalisDTSorDolbyDigital,
and gives a code indicating which channels are
detected(seetabletotheright).Subwooferoutputisnot
listed; if a subwoofer channel is detected then its
contentsare output, (the subwoofer output level can be
adjusted or the subwoofer turned off via the subwoofer
optionintheSOUNDmenu---seepage9fordetails).
The volume adjustment sets the overall
Surround output volume.
When a DTS / Dolby Digital input is not
detected this option is shown. Choose
between Pro Logic and Simulated.The
mode chosen here dictates the next menu
option.
If a DTS / Dolby Digital input is detected, or if
ProLogic is selectedin Surround mode, this
menu option is Speaker setting, allowing
selection of Normal, Phantom or 3Stereo
modes, as described on page 26.
If Simulated is selected in Surround mode,
this menu option is Simulated setting,
allowing selection of Disco, Movie or
Stadium modes, as described on page 26.
Allows adjustment of the volume for each
speaker, as described on page 26.
Allows setting of the distance from the
listening position to the front speakers.
Allows setting of the distance from the
listening position to the rear speakers. If the
rearsurround speakers are closerto youthan
thecentrespeaker,youmayheardialogue
“leakage” from the rear surround speakers. It
maybenecessarytoreducethevolumeofthe
rear speakers.
If you do not have an external centre speaker
connected, set to On. If you wish to connect
an external centre speaker then switch Off,
see page 30 for connection details.
Surround menu
If no DTS / Dolby Digital input is detected, Surround
mode appearsasamenuoption.
If a DTS / Dolby Digital input is detected, the
Surround menu is as shown above (no Surround
mode available).
TV/AV
SOUND
Code Front outputs Rear surround outputs
Left Right Centre Left Right
1+1 Dual mono output
1/0 Mono output
2/0 nn
3/0 nn n
2/1 nn Mono output
3/1 nn n Mono output
2/2 nn n n
3/2 nn n n n
Surround mode
Speaker setting /
Simulated setting
Volume
Speaker level
Rear distance
Front distance
Internal speaker