Panasonic TX-32PB50F, TX-28PB50F CRT Television User Manual


 
8
Press the PICTURE menu button
Move to chosen menu option
Adjust chosen option or access chosen menu
Press the TV/AV button at any time to go back to
watching TV
Pressing the STR button after having adjusted a feature
will store the setting as the default (replacing the
factory setting).
Increase or decrease the levels of these options
according to your personal preference.
With an NTSCsignal source connected to the TV,
the p icture hue can be adjusted to suit your taste.
Allows you to set the overall colour tone of the
picture. Choose from Cool, Normal and Warm.
Automatically reduces unwanted picture noise.
Automatically analyses the incoming picture and
processes it to give improved contrast and
optimum depth of field.
Lets you choose the screen refresh method :
in Auto mode, the TV software will select the best
mode for the signal being viewed; 100Hz will give
a steady picture for most signal transmission. We
recommend that you set Scan mode to
Progressive when viewing a PAL 60 or NTSC
transmission.
When viewing a PAL transmission (other than PAL
60) with Scan mode set to Progressive,the
screen will flicker, this is not a fault.
Note:
D When viewing a PAL transmission (other
than PAL 60) with Scan mode set to
Progressive, the screen will flicker, this is
not a fault.
Picture menu
PICTURE
PICTURE
TV/AV
STR
Contrast
Tint
Colour
Brightness
Sharpness
Colour
balance
P --- N R
AI
Scan mode