Filter
Top Products
26
This option allows you to “Skip” (bypass) the unused or
undesired Programme Numbers. The Function is only
applicable when the Programme Number Up or down
buttons are Pushed. The use of the remote control Direct
Programme Number Buttons overrides the Skip function.
TUNING MENU
SYS SELECT AUSTRALIA
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP OFF
Tuning Menu
Fine Tune Skip
In areas of poor reception or constant interference a
slight adjustment to the tuning may improve the
picture quality.
Using the Remote Control
1. Select the Programme location number you
want to fine tune.
2. Push the Set Up ( ) button.
3. Push the or button to select the
Tuning Menu. (See page 22).
4. Push the or button to access the Tuning
Menu.
5. Push the or button to select the
Fine Tune.
6. Push the or button to start the fine tune.
7. The television will fine tune in the direction
chosen by you.
8. To store the selected station, push the .
9. Push the Set Up ( ) button twice to return the
television to the Set Up menu.
10. Push the button to return the television to
normal operation.
Canceling the Fine Tuning
To cancel the Fine Tuning follow the Manual Tune
procedure on page 25.
Using the Front Panel
1. Select the Programme location number you
want to fine tune.
2. Push the button repeatedly until the Tuning
Mode is reached. (See page 22).
3. Push the or Button to access the Tuning
Menu.
4. Push the button to access Fine Tune.
5. Push the or Button to fine tune the
station.
6. The television will fine tune in the direction
chosen by you.
7. Push the to store the selected station.
8. Push the button to return the television to
the Tuning Menu.
9. To return the television to normal operation
push the button on the remote control or
repeatedly push the button until the volume
display appears.
Using the Remote Control
1. Select the Programme location number you
want to “Skip”.
2. Push the Set Up ( ) button.
3. Push the or button to access the
Tuning Menu. (See page 22).
4. Push the or button to select the Tuning
Menu.
5. Push the or button to select the
SKIP.
6. Push the or button to turn SKIP on or off.
7. To store the SKIP setting, push the button.
8. Push the button to return the television to
normal operation.
Using the Front Panel
1. Select the Programme location number you
want to “Skip”
2. Push the button repeatedly until the Tuning
Mode is reached. (See page 22).
3. Push the or Button to access the Tuning
Menu.
4. Push the button to select SKIP.
5. Push the or Button to turn the SKIP on or
off.
6. To store the SKIP setting, push the button.
7. To return the television to normal operation
push the button on the remote control or
repeatedly push the button until the volume
display appears.