Panasonic VQT9958 VCR User Manual


 
52 (E)
CONTENTS
Setup menus
The underlined items indicates the initial setting.
USER menu
<MENU>
No./Item Description
A00
LOAD
This selects the user file whose contents will
be loaded into USER1.
0000 USER2
: The USER2 file contents are
loaded.
0001 USER3
: The USER3 file contents are
loaded.
0002 USER4
: The USER4 file contents are
loaded.
0003 USER5
: The USER5 file contents are
loaded.
<Note>
When the SET button is pressed after loading,
the setting will be stored in the memory. When
the MENU button is pressed, the setting will not
be changed.
No./Item Description
A01
SAVE
This selects the user file into which the
USER1 settings will be saved.
0000 USER2
: The settings are saved in
USER2.
0001 USER3
: The settings are saved in
USER3.
0002 USER4
: The settings are saved in
USER4.
0003 USER5
: The settings are saved in
USER5.
0004
LOCKED
:
This display appears when all the user files are
in the change prohibit status.
<Notes>
OUser files whose status have been set to
change prohibit cannot be selected.
OWhen all the user files are in the change
prohibit status, the “LOCKED” display appears
and the contents cannot be saved.
A02
P. ON LOAD
This loads the contents of the selected user
file into USER1 and it starts operation with
the USER1 settings when the power is turned
on.
0000 OFF
:
Operation is started with the settings of the
previously set user file.
0001 USER2
:
The contents of USER2 are loaded into
USER1 and operation is started with the
USER1 settings.
0002 USER3
:
The contents of USER3 are loaded into
USER1 and operation is started with the
USER1 settings.
0003 USER4
:
The contents of USER4 are loaded into
USER1 and operation is started with the
USER1 settings.
0004 USER5
:
The contents of USER5 are loaded into
USER1 and operation is started with the
USER1 settings.
A03
MENU LOCK
This selects whether to set or release the user
file (USER2 – USER5) lock mode.
0000 OFF
: The lock is released (changes
can be made).
0001 ON
: The lock is set (changes are
prohibited).
<Note>
The lock cannot be set for USER1.
<Notes>
ONo. A00 (LOAD), No. A01 (SAVE) and No. A02 (P.ON LOAD) are
the menu items which can be set only for USER1.
They are not displayed with the USER2 – USER5 files.
ONo. A03 (MENU LOCK) is the menu item which can be set only for
the USER2 – USER5 files.
It is not displayed with USER1.