Filter
Top Products
120
Perform the following system settings required to operate
this unit.
q [Basic Setup] Basic system settings
Perform the following settings for basic operation.
● ADMIN Password
Set the password for an administrator.
Enter 4-32 alphanumeric characters.
The same method is used to enter, insert and delete char-
acters as for attaching text information to images. Refer to
page 55 about available characters.
● PSD User
When a user operates a controller compatible with PS·Data,
operation will be restricted by the priority and operational
level of the PSD user.
A PSD user should be one of the users registered in this
unit.
● Auto Login
Select ON and OFF whether or not to activate the auto login
function when turning the power of this unit on.
ON: Activates the auto login function.
OFF: Does not activate the auto login function. It is neces-
sary to perform the login operation every time this unit is
started up.
● Auto Login User
When ON is selected for "Auto Login", the user registered
as auto login user in this setting can log in the unit automat-
ically.
An auto login user should be one of the users registered in
this unit.
● Auto Logout
Select ON or OFF whether or not to activate the auto logout
function.
When ON is selected, auto logout will be carried out after a
specified time has passed while displaying live image with-
out operation.
OFF: Does not activate the auto logout function.
1 m/2 m/3 m/4 m/5 m/30 m: Activates the auto logout func-
tion when the selected time has passed after login.
Important:
The auto logout function will not be activated when ON
is selected for "Auto Login".
Depending on the user level of the auto login user,
operable functions may be different.
● Priority
Assign operating priorities when multiple users access this
unit simultaneously from the following.
Follow the priority: Operation by a user with higher priority
will be performed.
Pre-priority: Operation by the first accessed user will be
performed regardless of priority.
Post-priority: Operation by the last accessed user will be
performed regardless of priority.
● "GO TO LAST" before
Select time to be skipped to when the "GO TO LAST" button
is pressed during playback from the following.
5 s/10 s/30 s/1 m/5 m
● Language
Select a language for the SETUP MENU from the following.
JAPANESE/ENGLISH/FRANÇAIS/ESPAÑOL/DEUTSCH/
ITALIANO
● Beep (Operation)
Select ON or OFF whether or not to sound the buzzer when
operating the buttons.
ON: Sounds the buzzer when operating the buttons.
OFF: Does not sound the buzzer when operating the but-
tons.
● Buzzer (Error)
Select a buzzer operation when a problem has occurred
from the following.
OFF: Does not sound buzzer when a problem has
occurred.
1 s - 30 s (in 1 second intervals)/40 s/50 s/1 m/1 m/3 m/
4 m/5 m (in 1 minute intervals):
A buzzer will sound
for the selected duration after a problem has occurred.
EXT: The buzzer will sound continuously until the "ALARM
RESET" button on the front panel of the unit is pressed.
● Shutdown Time
Select a waiting time before starting the internal processing
against the power outage after an outage detection signal
has been supplied to the unit from the following.
10 s/20 s/30 s/1 m/2 m/3 m/4 m/5 m
■ [System] Settings on System
Schedule
System
Comm
Switcher
SETUP MENU
LIVE
Maintenance Recording Event
Display
Basic Setup
Time & Date
User Regist.
User Edit
User Delete
Host Regist.
Host Edit
Host Delete
User Level
Save/Load
■
ADMIN Password
■
PSD User
■
Auto Login
Auto Login User
■
Auto Logout
■
Priority
■
"GO TO LAST" before
■
Language
■
Beep(Operation)
■
Buzzer(Error)
■
Shutdown Time
■
Auto Copy
*****
OFF
ON
ADMIN
ADMIN
Follow the priority.
5s
ENGLISH
ON
2s
10s
OFF