Filter
Top Products
• Check the host registration setting. When host authentica-
tion is set to ON, you cannot establish the connection
from computers other than the PC registered as the host.
160
Check item/Remedy
Problem
Page
The additional disk space of
HDD is not displayed.
The available disk space of
HDD is not displayed on the
right bar.
Cannot establish the connec-
tion via the network.
Response or Image update
takes time.
The power cord insulation is
damaged.
The power cord, plug and con-
nectors get hot during the use.
The power cord gets heat when
bent or stretched.
Inspect the power cord, power plug and connectors periodically.
• Check if "Disk End Mode" is set to STOP.
• Check if the "Disk End Mode" is set to STOP.
• Check the network settings of the unit and PC.
• Check if the network is crowded.
• The power cord, plug and connectors are worn out. This may result in electric
shock or a fire. Unplug the power plug from the AC outlet immediately, and
refer to qualified service personnel.
• Check if there is a partition in the HDD.
• Check if there is a partition in the HDD.
Refer to p. 94.
Refer to p. 94.
Refer to the
Network Setup
Instructions (PDF).
–
Refer to p. 123.
–
–