Filter
Top Products
65
Notes:
• When a user is operating this unit using a PS·Data compatible controller, this user can log in automatically as a PSD user
set for "PSD User" of "System" on the SETUP MENU.
• When a user logged in this unit using a PS·Data compatible controller and didn’t operate the unit for around 2 minutes, this
PSD user will be forced to log out.
• When ON is selected for "Auto Login" of "System", a user who logged in automatically will be forced to log out if this user
didn’t operate the unit for around 30 seconds.
● When the unit is operated using a PC via a network
Operate using a PC via a network. Up to 8 hosts (PCs) can access the unit.
When a host tries to log in after 8 hosts have already logged in the unit, the unit will work as follows according to the setting for
"Priority" of "System".
When accessing the unit using a PC via a network, the unit will work as follows according to the setting for "User
Authentication" and "Host Authentication" of "NW Setup 1".
Setting for "Priority"
Follow the priority
Pre-priority
Post-priority
When a host’s priority is higher than the one of the other host
who has already logged in, this host can log in and other
host who has already logged in will be forced to log out.
When a host’s priority is lower than the one of the other host
who has already logged in, this host cannot log in.
Any host cannot log in regardless of priority.
Any host can log in regardless of priority.
Description
Setting for "User
Authentication"
OFF
ON
OFF
ON
Setting for "Host
Authentication"
OFF
OFF
ON
ON
User/Host to log in
Log in the unit as an adminis-
trator.
Log in the unit as a regis-
tered user.
Log in the unit as a regis-
tered host.
Log in the unit as a regis-
tered host.
User authentication will not
be performed.
When the host is not regis-
tered, log in as a registered
user.
Note
The login window will be dis-
played.
The login window will not be
displayed.
The login window will be dis-
played when accessing
using a not registered host.