Filter
Top Products
100
■ Manual Erase Function
1. Repeat the procedures until the ERASE menu is dis-
played on the monitor screen for auto erase.
2. Move the cursor to the ERASE DATA BEFORE parame-
ter in the menu by pressing the D or C button.
3. Select the month by pressing the + or - button, then
press the B button to select the date and year by
repeating the procedure.
4. Move the cursor to the EXECUTE parameter by press-
ing the D or C button.
Select “YES” by pressing the A or B button, then press
the SET button to execute erase.
The recorded data before the specified date will be
erased from the disk.
5. When the erase is completed, “DONE!” appears on the
lower-center in the menu.
6. Press the SETUP/ESC button for two seconds or more
to close the menu and return to the normal screen.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[SET]:EXECUTE YES NO
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[ESC]:STOP YES NO
NOW ERASING
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[ESC]:STOP YES NO
DONE!