Filter
Top Products
36
r Warning Display
Displays the status in case of Disk Recorder trouble.
THERMAL ✽: Indicates thermal error in the Disk
Recorder or the extension units.
(✽ indicates the extension unit number)
HDD ✽✽%: Is displayed when the remaining space of
the Hard Disk reaches a specified value.
(✽✽ indicates the remaining capacity.)
DISK FULL: Is displayed when the remaining space of
the Hard Disk reaches 0 %.
DVD ✽✽%: Indicates the remaining space of the DVD-
RAM Disk. (✽✽ indicates the remaining capacity.)
ALTERED: Is displayed when the recorded data are
altered.
ERROR ✽-✽: Indicates access error of the Hard Disk.
(✽-✽ indicates the Hard Disk number in the Disk
Information menu)
ERROR: Indicates that the other errors have occurred.
PWR LOSS: Is displayed when the UPS
(Uninterrupted Power Supply) detects a power
failure.
WARNING ✽-✽: Indicates that the hard disk will
become failure soon. Replace ones for system
complement.
PROTECTED: Indicates that the DVD-RAM disk is
not write enabled.
NO DISK: Indicates that the DVD-RAM disk is not
inserted in the DVD Extension Unit.
FORMAT ERROR or
MEDIUM ERROR: Indicates that the DVD-RAM disk
is not identified.
DVD BUSY: Indicates that the DVD Extension Unit
is not ready or is being accessed.
REMOVED HD: Indicates that the HDD has been
removed due to access errors. Identify the
removed HDD on DISK MENU and replace.
GETTING IP: Indicates that the recorder is acquir-
ing an IP address from the server when DHCP
is on.
t System Status Display
Displays the system status of the Disk Recorder.
5: Indicates that data are being played back.
5 X✽: Indicates that data are being played back with
the search function.
(✽ indicates the search speed value)
y : Indicates that the playback is being paused.
COPYING: Indicates that data are being copied.
LOCKED: Indicates that the buttons are locked.
BUSY: Indicates that the line is busy.
y Group Display
Displays the selected group (G1, G2, G3, G4).
When all groups are selected, the display is disabled.
u Electronic Zoom Display
Displays to indicate that the zooming mode is selected.
ZOOM X✽: Indicates that the electronic zoom mode is
selected (✽ indicates a value)
i Group Title Display
Displays the group title edited in the setup menu.
o Camera Title Display
Displays the camera title edited in the setup menu.
It can also enable the alarm display set in the setup
menu when an alarm is activated.
ALARM: Receives an alarm from the ALARM port.
VMD: Detects a motion on the image
CH✽✽LOSS: Detects a video signal loss has occurred.
!0 REMOTE
Indicates that the access from network is under way.