Filter
Top Products
Bulletin 4480-T7-US Karrykrimp 2
Parker Hannifin Corporation
Hose Products Division
Wickliffe, OH
9
For Reference Only
Notes:
This chart is displayed on the yellow cover of the Karrykrimp 2 machine.
The 43 Series dies listed are interchangeable between all of the Parkrimp machines. The die rings are not
interchangeable between machines. Use only 85C-R01 and 85C-R02 die rings on the Karrykrimp 2 machine.
For a complete selection of hose and fittings, see Parker Catalog 4400.
Caution: To ensure consistant quality, crimp diameters must be checked:
1. After first assembly
2. At regular intervals during the production, such as first, last and every 50th assembly.
If you find your crimp diameters out of tolerance, inspect each assembly made. Never allow hose assemblies with an
incorrect crimp diameter to be used. Use the appropriate Parker Machine Trouble Shooting Guide to determine the cause.
If you are unable to determine the cause of the problem, call our Hose Products Division Technical Services
Department at (440) 943-5700, for assistance.
Additional Hose Die Selection Charts are available upon request from your Parker supplier.
Tool Selection Chart