2 C293M-B (1/09)
Important Safety Instructions
1. Installation and servicing should only be done by qualified service personnel and conform to all local
codes.
2. Installation shall be done in accordance with all local and national electrical and mechanical codes
utilizing only approved materials.
3. Use only installation methods and materials capable of supporting four times the maximum
specified load.
4. Please thoroughly familiarize yourself with the information in this manual prior to installation and
operation.
Description
The SWM Series Spectra
®
compact wall mount provides indoor and outdoor wall mounting for Spectra
and DF5 Series pendant domes. The mount features cable feedthrough that conceals the electrical wiring
to the dome back box. A 1.5-inch NPT pipe thread is provided in the mount to attach the pendant dome.
Anti-seize compound is supplied to be applied to the pipe thread. The sun shield used for the outdoor
versions of the pendant dome back boxes is readily accepted by the mount.
The mount can be attached to any vertical load-bearing surface or to an SWM-PA Series pole adapter by
means of a mounting cleat. A gasket is affixed to the base to protect the interior from moisture.
The mount is constructed of aluminum and has either a light gray or black polyester powder coat finish.
MODELS
PARTS LIST
SWM-GY Compact wall mount with cable feedthrough for use with Spectra or DF5 Series pendant
domes. Gray finish.
SWM-BK Same as SWM-GY, except black finish.
Qty Description
1 Wall mount, gray or black
1 Mounting cleat
1 Adjustment plate
1 10-24 set screw
1 Anti-seize lubricant