Filter
Top Products
6 C293M-B (1/09)
Specifications
MECHANICAL
Construction Cast aluminum
Finish
SWM-GY Gray polyester powder coat
SWM-BK Black polyester powder coat
Mount Method Mount is secured by a set screw to a mounting cleat that is
attached to a surface with two fasteners (not supplied). A gasket
is affixed to the base to protect the interior from moisture. An
adjustment plate is provided to allow the wall mount to be
shimmed when the mounting surface is not plumb. The lower
hole in the mounting cleat is elongated, which allows for vertical
alignment adjustment.
Dome Mounting 1-1/2-inch NPT pipe thread in mount tip. Anti-seize lubricant is
supplied to be applied to the pipe threads.
Cable Entry One cable feedthrough hole in the mounting cleat. Cable feeds
through the mount into the pendant dome.
Maximum Load 10 lb (4.5 kg)
GENERAL
Environment Indoor/outdoor
Weight
Unit 1.1 lb (0.50 kg)
Shipping 2.0 lb (0.91 kg)
(Design and product specifications subject to change without notice.)
Figure 3. Dimension Drawing
2.54
(6.45)
6.25
(15.88)
3.10
(7.87)
4.15
(10.54)
NOTE: VALUES IN PARENTHESIS ARE CENTIMETERS; ALL OTHERS ARE INCHES.