Filter
Top Products
18 C636M-E (4/05)
Figure 6. DX9100 Rack Mount Installation
To install the unit into an equipment rack:
1. Attach the two brackets to both sides of the unit.
2. Attach the mounting rails to the equipment rack.
3. Place the unit onto the mounting rails. It should slide in and out of the rack easily.
4. Fasten the rack ears to the equipment rack.
RACK
RECORDER/VIEWSTATION
(6) SCREWS, 8-32 X .250-INCH
PAN HEAD
(4) SCREWS,
10-32 X .375-INCH
FLAT HEAD
(8) SCREWS,
10-32 X .375-INCH,
FLAT HEAD
BRACKET
(SIDE VIEW)
SLOTTED HOLES
TOWARDS FRONT
OF UNIT
TAPERED ENDS
TOWARDS REAR
OF UNIT
(4) SCREWS,
10-32 X .750-INCH
PHILLIPS, PAN HEAD
WITH WASHERS
REAR MOUNTING RAIL
FRONT MOUNTING RAIL
(6) SCREWS,
8-32 X .375-INCH,
PAN HEAD WITH
WASHERS
RACK EAR