Filter
Top Products
32 C636M-E (4/05)
RECORDER INITIALIZATION OPTIONS
To set the recorder initialization options, you must open the DX9000 Server Configuration Utility.
1. Double-click the DX9000 Server Configuration Utility icon on the desktop.
2. Set the “Frame rate & resolution” from the drop-down box. The default is CIF, Half, which is 15 ips at CIF resolution for
DX9116H models and 30 ips at CIF resolution for DX9116F models.
The following figure shows the options for the DX9116H models.
Figure 23. DX9116H Frame Rate and Resolution
The following figure shows the options for the DX9116F models.
Figure 24. DX9116F Frame Rate and Resolution
NOTE: When changing the resolution from CIF to 2CIF or 2CIF to CIF, the video recorded prior to the change of resolu-
tions will not be available in the Export Viewer and Sherlock. Also, you must go back to the Client Configuration Utility
and click Configure after you restart the recorder.
The number of channels is set automatically based on the frame rate and resolution you select. Click for more
information. The License Information dialog box displays important information about your license, such as the maximum
allowed channels and the frame rates and resolutions that are allowed.
Figure 25. License Information Dialog Box
3. Select PAL or NTSC as the recording format. The default is NTSC.
NOTE: If you change the recording format, you must restart the recorder.