Pelco DX4600 DVR User Manual


 
C2673M-E (6/11) 15
Remote Control
The DX4500/DX4600 remote control allows you to operate the DVR without having to use the mouse or front panel controls. Figure 4 shows the
remote control and describes the function of each button.
Figure 4. Remote Control
POWER:
Turns on the unit.
If the DVR is turned on but a user is not logged on, the message “You have to login first” appears.
If a user is already logged on, the message “Please enter the password” appears. If there is no activity for a period of time, the dialog
box disappears.
Channel Selection:
MAIN: Displays the Selecting Starting Channel dialog box, to select the window presentation as viewed on the VGA or main analog
monitor. Use in conjunction with buttons 1 ot 8 or 1 to 16 to configure the first camera input displayed on the VGA or main analog
(MAIN-OUT BNC) monitor. This button performs the same function as the MAIN icon on the GUI toolbar.
SPOT: Displays the Selecting Starting Channel dialog box, to select the window presentation as viewed on a spot monitor. Use in
conjunction with buttons 1 to 8 or 1 to 16 to configure the first camera input is displayed. This button performs the same function as
Login icon on the GUI toolbar.
LOGIN: Displays the login dialog box if a user is not logged on to the system. If a user is logged on, pressing this button logs the user out.
When a user is logged on, the button is lit blue; if a user is not logged on, the button is not lit. This button performs the same function as
the person icon on the GUI toolbar.