Filter
Top Products
C2673M-E (6/11) 29
• Daylight Saving: Ensures that the recorded video displays the correct time, reflecting the annual change to daylight saving time (DST).
Select this setting if the DX4500/DX4600 is located in a state or country that observes daylight saving time.
You must configure daylight saving time on both the DX4500/DX4600 and the computer on which the remote client application is running.
Configure the time zone on the remote client system, using the System menu in the Setup window. For information about configuring the
time zone on the remote client PC, refer to the client operation manual. For information about the time zone for your area, refer to
Appendix on page 38.
1. In the Setup window, on the front panel or remote control, press the up/down arrow buttons to select System. Using the mouse,
click System. The System page opens, listing the available options.
Figure 19. System Page
2. On the front panel or remote control, press ENTER. Using the mouse, click the Date/Time option. The Date/Time settings are displayed;
by default the date format is MM/DD/YYYY.
Figure 20. Date/Time Settings
3. Select the date.
a. On the front panel or remote control, press ENTER twice. Using the mouse, click the month settings box. The month settings box
changes color.
b. On the front panel or remote control, press the left/right arrow buttons to display the desired month, and then press ENTER.
Using the mouse, click the settings box.
Figure 21. Date Setting Entry Box