Filter
Top Products
DIGITAL
SETUP
28
1
Press SETUP. Press 2 or 3 to
choose DIGITAL SETUP.
2
Press CH+o or CH-p to select
a feature, then press 3.
3
Press CH+o or CH-p to
select a setting. Press ENTER.
DUAL MONO: Adjust when
Disc sound is in Stereo (from
left/right channels).
Choose STEREO to separate the
left/right sounds into the
left/right speakers. Choose L-
MONO or R-MONO to hear
either the left or right channel at
both speakers. Choose MIX-
MONO to hear a mixture of the
left and right channels at each
speaker.
DYNAMIC: If your Disc has
Dolby Digital sound, use DYNAM-
IC to minimize volume extremes.
Adjust the gap between soft and
loud sounds by choosing a ratio
between 1/8 and FULL, or choose
OFF.
SPDIF OUTPUT (Sony-Philips
Digital Interface): Choose SPDIF
OFF if the TV/DVD is connected
to a Stereo using the red/white
AUDIO OUTPUT jacks.
Choose SPDIF RAW if it’s con-
nected to an audio system using
the DVD DIGITAL OUTPUT
COAXIAL jack.
Discs are recorded in a certain
sampling rate.The higher the rate,
the better the sound quality.
Choose PCM/96K if you play
Discs recorded at the high rate of
96 kHz. Otherwise, choose
PCM/48K.
4
Press SETUP to remove the
menu.
POWER
SLEEP
CLOCK
VOL+
PICTURE/DEL.
S.EFFECT
VOL-
MTS
MENU
TV/AV/DVD
DISPLAY
R/L
SKIP
SEARCH
MODE
SUBTITLE ZOOM
STOP
PLAY/PAUSE
/
9
6
3
MUTE
RECALL
OPEN/CLOSE
TITLE
MENU/PBC SETUP
SCAN
REPEAT
LANGUAGE
ANGLE
REPEAT
A-B
ENTER
21
FAV.
8
7
5
4
0
SLOW
DVD10+
CH+
CH-
1-3
1,4
DUAL MONO STEREO
DYNAMIC L-MONO
SPDIF OUTPUT R-MONO
MIX-MONO
- - DIGITAL SETUP - -
SET LEFT MONO MODE