Filter
Top Products
Use programmed recording to automatically start and stop a
recording at a later date.
To make a programmed recording, your TV-VIDEO Combi
needs to know:
* the date you want to make the recording;
* the programme number for the TV channel you want to
record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC;
* the recording speed (SP/LP).
The TV-VIDEO Combi stores all the information in a TIMER
block. You can programme up to 6 TIMER blocks a month in
advance.
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
With ’VPS and PDC’, the TV station controls the start time and
the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV
programme you want to record begins earlier or finishes later
than expected.
Usually the start time is the same as the VPS or PDC time. But
if your TV guide gives a VPS or PDC time which is different to
the programme’s start time (for example, 20.15 and VPS 20.14),
you must enter ’20.14’ as the start time.
If you want to programme a time that is different from the VPS
or PDC time, you must switch off VPS or PDC.
Programming a recording
(with ’SHOWVIEW’)
All the important information needed for a programming is
contained in the SHOWVIEW-programming number.
a Press the TIMER s button on the remote control.
b Select the line ’ShowView’ with the menu buttons
B or A and confirm with the C button.
c Enter the entire SHOWVIEW-number (up to 9 digits)
printed in your TV guide next to the start time of a TV
programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the SHOWVIEW-number.
If you make a mistake, you can clear your instructions
with the CLEAR button.
ShowView
CODE REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
123456((( ONCE
0-9 Store:
press OK
d In line ’REPEAT’ select the kind of programming
required with the B or A button.
’ONCE’: recording only once
’Mo-Fr’: recordings every day from Monday to Friday.
’Mo-Su’: recordings every day from Monday to Sunday.
’WEEKLY’: recordings every week on the same day of
the week.
e Confirm with the OK button. Your programming details
will then appear on the TV screen.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDCREP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
Store:
press OK
DIf SHOWVIEW does not recognise the TV channel,
’P??’ will appear on the TV screen. Instead of
’P??’, you can select the programme number
(programme name) you want with the number
buttons 0-9 .
DIf ’Code error’ appears on the TV screen, this
means you entered an incorrect SHOWVIEW-code
number or the incorrect date. Correct your
instructions or end with the TIMERs button.
DIf ’Daily error’ appears on the TV screen, the
date was incorrectly entered.
DUnder ’VPS/PDC’, use the B or A button to
switch ’VPS or PDC’ on or off.
7. PROGRAMMED RECORDING (TIMER)
17