Filter
Top Products
Programming a recording with TELETEXT
With this function programming a recording will be
considerably easier. In TELETEXT you select the TV
programme you want to record. All the required information
for recording will be transferred and stored in a TIMER block.
You can find more information on TELETEXT in the chapter ’TV
SET FUNCTIONS’.
a Select the TV channel you want to record from.
b Press TELETEXTe to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you
have selected.
c With the number buttons 0-9 select the TELETEXT
programme guide page. This page can be stored as the
preferred page (see paragraph ’How to read TELETEXT’).
d Press TIMER s .’PLEASE WAIT...’ willbriefly
appear at the bottom of the screen.
Next, a highlighted title line will appear.
DIf ’NO TIMER INFORMATION ON THIS
PAGE’ appears, TELETEXT programming cannot be
used for the programme you have selected. In this
case, you should programme the recording as
described in the paragraph ’programming a
recording’.
e A cursor (h) will appear at the first programme line. Use
the B and A buttons to move the cursor (h) to the TV
programme you want to record.
DIf you want to cancel this function, press
TELETEXT e .
f Press OK . The timer menu will appear. The required
programming information has been stored in a TIMER
block. Please check the information.
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDCREP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
Store:
press OK
g For changing the timer information, select the entry field
with the D or C button. Change the information with
the B or A button or with the number buttons 0-9 .
DUnder ’REP.’, use the B or A button to select
daily or weekly programming.
’ONCE’: Recording only once.
’Mo-Fr’: Recording from Monday to Friday.
’Mo-Su’: Recording from Monday to Sunday.
’WEEKL’: Recording every week on the same day.
DUnder ’VPS/PDC’ switch ’VPS/PDC’ on or off with
the B or A button.
DUnder ’LP’ select the recording speed ’SP’ or ’LP’
with the B or A button.
h When all information is correct, press OK .
i Confirm the message on the screen with OK .
A Timer recording can only start, if the set is not being
used for other video recorder functions (e.g. playback).
DThe programming information has been stored in a
TIMER block.
j Exit the menu with the TIMERs button.
k Make sure that the cassette you have put in can be
recorded on.
Automatic recording from a satellite
receiver (SAT RECORDING)
You can use this function if you own a satellite receiver that
can control other machines via a scart cable and a
programming function.
a Press TIMER s on the remote control.
b Select the line ’TIMER PROGRAMMING’ with the
B or A button and confirm with C .
TIMER PROGRAMMING
VPS
DATEPROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
-- -- --:-- --:--- - -----
Exit: Start:
press TIMER press
19