Filter
Top Products
Connecting the cables
a Insert the aerial plug into the 2 socket.
b Insert the plug of the mains cable into the wall socket.
c If the little red light at the front panel of the set is not lit,
please switch on the set. The power switch 8 is
located on the left side panel of the set.
Connecting a decoder or other equipment
You can also connect additional equipment. For instance, a
satellite receiver, decoder or camcorder to EXT.1 or a
satellite receiver, or camcorder to EXT.2 .
E If you don’t connect a decoder, use the EXT.1 socket for
connecting other equipment.
You can connect a HiFi-stereo set or a ’Dolby Prologic’
decoder to the socket AUDIOOUT L/R (audio output left/right).
DIf you want to switch off the internal speakers please
read chapter ’ADDITIONAL FUNCTIONS’, paragraph
’Switching the internal speakers on or off’.
1. CONNECTING YOUR TV-VIDEO COMBI
4