Filter
Top Products
Fullscreen
This mode displays images in full screen.
The Philips Wireless Smart-Loader 22AV1120/00 is an installation tool especially designed for easy and
fast installation of Philips Institutional TV’s.
Preparation
Make sure that the 3 R6/AA sized batteries are placed correctly in the battery compartment of the
Wireless Smart-Loader. Turn the power switch on at the left side of the product. A green LED at the top
casing should light up when pressing any button indicating operational batteries. When the LED light is
red, it indicates that the batteries need to be replaced.
The installation procedure consists of three steps:
1. Choosing the master TV
2. Programming the Wireless Smart-Loader
3. Installing a TV with the Wireless Smart-Loader
> Step 3 can be repeated on as many TV sets as required.
1. Choosing a Master TV
The master TV is the TV whose installation set-up has to be copied into other TV’s of the same type.
2. Programming the Wireless Smart-Loader
This step has to be done only once or any time the program of the Wireless Smart-Loader has to be
changed.
Point the Wireless Smart-Loader to the TV’s infra red receiver (distance around 5 to 30cm).
---- Press the “MENU” Key on the Wireless Smart-Loader.
TV shows the following menu:
SMARTLOADER TO TV >
TV TO SMARTLOADER >
° Highlight “TV TO SMARTLOADER”
° Press the right cursor key on the Wireless Smart-Loader for wireless method or on the TV Remote
Control for wired method.
- 17 -