Filter
Top Products
> A number display shows from 1~100 the percentage of memory storage progress
from the TV to the Wireless Smart-Loader (100 = fully loaded).
TV TO SMARTLOADER |||-------- ##
> When the data transfer is completed, ## is “100”, the following menu appears for
3 seconds:
SMARTLOADER READY >
> Now the Wireless Smart-Loader is programmed and can be used to install other
TV sets.
3. Installing a TV with the Wireless Smart-Loader
Use a Wireless Smart-Loader programmed with the settings from a master TV of the same type.
Be sure to use the same method of programming the Wireless Smart-Loader. It means
that if you program the Wireless Smart-Loader using the wireless method, you have to use the
same method to install the TV.
Turn on the TV and point the Wireless Smart-Loader to the TV’s infra red receiver (distance
around 30cm).
---- Press the “MENU” Key on the Wireless Smart-Loader.
° Highlight “SMARTLOADER TO TV”
° Press the right arrow key on the Wireless Smart-Loader for wireless method or on the TV
Remote Control for wired method.
> A number display shows from 1~100 the percentage of memory storage progress
from the Wireless Smart-Loader to the TV (100 = fully loaded).
SMARTLOADER TO TV |||-------- ##
> When data transfer is completed, ## is “100”, the following menu appears for 3
seconds:
TV READY >
> After that, the following menu comes up
GOODBYE >
> The TV goes to standby now and will start up automatically. Your TV is now
installed and ready for use.
- 18 -