Filter
Top Products
In this sub menu the behavior of the TV after switching on and the behavior of the On Screen Display can be
selected.
•
Welcome Message: Press Cursor
Left/Right to display Welcome
message entry menu:
o Welcome Message
o Display Yes/No
o Line 1
o Line 2
o Clear
With the Up/Down key you can
set the message characters.
• Switch On Channel: This item
sets the television’s channel at
switch on.
• Switch On Volume: This item
sets the television’s volume at
switch on. Use the Right/Left key
to adjust.
• Switch On Pic Fmt: This item sets the television’s Picture Format at switch on. Use the
Right/Left key to select the desired format.
• Power On: The Power On menu function defines the behavior of the television whenever
AC Power is applied. The available options are "FORCED ON", "LAST STATUS",
“STANDBY” and “ON”.
o FORCED ON: TV will be automatically switched to ON mode whenever the
mains power is turned ON or resumed after a power interruption. Note that the
remote control STANDBY key will no longer function when TV is set in this
mode. TV can only be switched OFF by means of the main switch or a set-up
remote control or by ESP function (Energy Saving Programmability controls the
maximum continuous viewing time allowed).
o LAST STATUS: TV will be automatically switched to the last status (either
STANDBY or ON) whenever the mains power is turned ON or resumed after a
power interruption.
o STANDBY: TV will be automatically switched to STANDBY mode (even if the
last status was ON) whenever the mains power is turned ON or resumed after a
power interruption.
o ON (available only on TV with Iboard sw version IC4XA1_1.6 onwards.): Similar
function as “FORCED ON” but the remote control STANDBY key function is
enabled when TV is set to this mode.
• Volume Indicator: To display volume indicator when adjusting volume, select "YES".
Select “NO” to hide the volume indicator.
• Channel Dis
p
la
y
: Channel D
i
s
p
la
y
values can be: Number, Label, All, None.
- 9 -