Filter
Top Products
21
English
EN
Automatically switch the TV on (on
timer)
mode.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [On timer].
3 Press to enter the [On timer] menu.
[Activate]: Selects how often the TV
is switched on.
[Time]: Sets the time to switch on the
TV.
[Programme no.]: Selects the channel
or the connected device.
4 Press EXIT to exit.
Tip
Select [On timer] > [Activate] > [Off] to
disable this feature.
Use TV locks
You can prevent your children from watching
certain programmes or channels by locking the
TV controls.
Set or change your PIN code
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Set code] / [Change code].
» The [Set code] / [Change code] menu
appears.
3 Enter your code using the Numeric
buttons.
» Follow the on-screen instructions to
create or change your PIN code.
Tip
If you forget your code, enter ‘8888’ to
override any existing codes.
Use timers
You can set timers to switch the TV to standby
Tip
Set the TV clock before you use timers.
Automatically switch the TV to
standby (sleep timer)
Sleep timer switches the TV to standby after a
Tip
You can switch off your TV earlier or reset the
sleep timer during the countdown.
Press SLEEP on the Guest remote control to
quick access the Sleep timer menu.
1 Press MENU.
2 Press to select [Setup] >
[Features] > [Sleep timer].
» The [Sleep timer] menu appears.
3 Press to select a value between zero
and 180 minutes.
» The sleep timer can be set in steps of
timer is switched off.
4 Press OK to switch on the sleep timer.
» The TV switches to standby after the