Filter
Top Products
39
English
EN
Installation
[Blank channel]
The Blank channel function disables the
display of video on the TV, but does not affect
the audio output. This function can be used
for audio applications (example: music-only
channels, and so on) which do not necessarily
require the display of video.
1 Enters the [Blank channel], the list of all
channels appear.
2 Selects one or more channels and press
OK to mark.
3 The channels marked with [X] will not
display video on the TV.
[Disable auto updating]
[Software]: Disables automatic TV
software update via OAD (On the air
software download).
[Channel]: Disables automatic channel
installation when new channels are
detected.
[Both]: Disables automatic update
of the TV software and the channel
installation.
[Off]: Enables automatic update of
the TV software and the channel
installation.
[Skip scrambled signals]
[Off]: Allows scrambled channels in
the channel list.
[On]: Skips the scrambled channels in
the channel list.
[Multi remote control]
Guest remote control supports up to four
televisions operating in one room without
interference from each other’s remote controls.
Each TV and the Guest remote control can be
set to match each others.
1 Enters [Multi remote control] and
designate one colour (Blue / Green /
Yellow / Red) to the TV. Selects [Off] to
disable [Multi remote control] function.
2 Sets the Guest remote control to the
corresponding colour by pressing
MENU and one of the colour button
simultaneously for more than 4 seconds.
3 The Guest remote control can operate
the TV with the corresponding colour.
Note
EXAMPLE: Press MENU and Red button
simultaneously on the Guest remote
control for more than 4 seconds to
operate the TV with [Red] colour selected
in [Multi remote control] menu.
Guest remote control will be set to default
Blue colour after replacing batteries.
[MyChoice]
[Off]: Disables MyChoice function.
[On]: [MyChoice] appears in the
Guest home menu.
Press
MENU > [MyChoice] and
enters authorized PIN code to watch
MyChoice channels.