Filter
Top Products
28 EN
Step 3 Install channels
Automatically installs the available analogue
and digital TV channels and digital radio
channels.
1 From the channel installation guide
screen, select [Full installation].
2 Press OK
» The TV starts to search and store all
the available channels.
3 When installation is complete, press OK
to exit the installation menu.
Update the channel list
You can enable automatic update of channels
when your TV is in standby mode. The
channels stored in your TV are updated every
morning according to the channel information
in the broadcast.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Standby update].
3 Select [On] to enable the automatic
update or select [Off] to disable it.
6 Install channels
prompted to select a menu language and to
install TV and digital radio channels (if available).
This chapter provides instructions on how to
Automatically install channels
This section describes how to search and store
channels automatically.
Step 1 Select your menu language
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Language] > [Menu
language].
3 Press OK or to enter [Menu language].
4 Press to select a language.
5 Press OK
6 Press to return to [Installation] menu.
Step 2 Select your country
Select the country where you are installing the
TV. The available channels for the country are
installed on the TV.
1 Press MENU.
2 Press to select [Setup] >
[Installation] > [Channel installation] >
[Automatic channel search].
3 Press OK or to enter the menu.
» The country menu appears.
4 Press to select your country.
5 Press OK
» The channel installation guide appears
on the screen.