Filter
Top Products
10
The location of the power connector
varies according to TV model.
2 Insert the power cord fully into the power
connector.
Connect the power cord plug to the power
outlet. Ensure that the cord is tightly secured at
both ends.
Disconnect the TV from the power
Caution
Pull the power cord by the plug; do not pull on the power
cord.
1 Unplug the power cord from the power
outlet.
2 Unplug the power cord from the power
connector at the back of the TV.
Insert the remote control
batteries
1 Slide the battery cover off the back of the
remote control.
2 Insert the two supplied batteries (AAA).
Be sure the + and - ends of the batteries
line up with the markings inside the case.
3 Slide the cover back into position.
Note
Remove the batteries if not using the remote control for
an extended period of time.
Connect the antenna cable
Connect the antenna cable to the TV antenna
socket (75
) at the back of the TV.
Connect the power cord
Warning
Verify that your mains voltage corresponds with the
voltage printed at the back of the TV. Do not insert the
mains cord if the voltage is different.
1 Locate the power connector at the back of
the TV.
CableCable
EN