Filter
Top Products
Manual Store
(applicable to certain TV models only)
This menu is used to store channels one at a
time.
MENU
& Press the key.
é With the cursor, select the Install menu
and followed by the Manual.
“ Colour Sys(tem): use the or
key to select the desired colour system;
Auto, PAL, NTSC 3.58, NTSC 4.43
and SECAM.
‘ Sound Sys(tem): use the or
key to select the desired sound system;
Auto, BG, I, DK or M.
( Search: press . The search starts.
Once a channel is found, the scanning
stops. Go to the next step.
If no picture is found, consult the possible
solutions ('Tips' page).
§ Channel: enter the required channel
with the , or digit keys.
Fine Tune: if the reception is not
satisfactory, adjust using the
or
keys.
! Store: press .The channel is stored.
ç Repeat steps “ to ‘ for each channel
you wish to store.
à To quit the menus, press
Ë
.
Sort
(applicable to certain TV models only)
This feature allows you to rearrange channels
according to your preference.
MENU
& Press the key.The Main menu is
displayed on the screen.
é With the cursor, select the Install menu
followed by the Sort menu.
“ Use the
or key to select the
channel number you want to change
8
from (e.g. 001) and confirm selection with
the
key.
‘ Use the
or key to select the
channel number you want to change to
(e.g. 004) and confirm selection with the
key.
The change is done. Channel 4 will move up to
channel 3 and channel 3 will move up to channel
2.
( Repeat steps “ and ‘ for each
channel you wish to change.
§ To quit the menus, press .
Ë