Remote control keys
(Choose the right remote control that
came with your TV set)
Teletext /Personal Zapping
In teletext mode; the colour keys
allows direct access to an item or
corresponding pages (p 15-16)
In Personal Zapping mode; you can
surf up to 10 personal channels
for each key (p14)
Not applicable.
Add Personal Zapping list
Adds and stores channels into
Personal Zapping list (p. 14)
Not applicable.
Smart Sound
Used to access a series of stored
settings:Theatre, Music,Voice or
Personal.
Menu
To call up or exit menus.
Volume
To adjust the sound level.
Mute
To turn off or turn on sound.
Alternate channel
To switch between the current and
the previous channel.
During stereo transmission, to switch
from Stereo to Mono. During dual
sound transmission, to switch between
language and . (For NTSC version:
select Mono, Stereo, or SAP).
Digit keys
Direct access to the channels. For a
2-digit channel, enter the second
digit before the first digit disappears.
Sleeptimer
Not applicable.
Standby
Lets you place the TV set on standby.
To turn on the TV, press CH + or –,
, AV, A/CH or digit keys
Teletext keys (p. 15-16)
Delete Personal Zapping list
Deletes stored channels from
Personal Zapping list (p. 14)
Smart Picture
To access a series of stored
settings: Rich, Natural, Soft,
DVD/VCD or Personal.
Incredible Surround
To enable/disable the Incredible
Surround feature. In stereo, the
speaker sounds appear further
apart. In mono, a pseudo-spatial
effect is obtained.
Cursor
These 4 keys are used to move
around the menus or provide
direct access to the different
picture formats.
Channel selection
To access the next or previous
channel.The number and sound
modes are displayed for a few
moments whenever you select a
new channel.
Teletext key (p. 15-16)
On screen display
To display/clear the on-screen
information. Press the key for 5
seconds to activate permanent
display of channel number.This key
is also used to exit from the menu.
AV channel selection
Press several times to select
AV1, CVI,
AV2, YpbPr, or Side.
6