Filter
Top Products
33Connect Accessory Devices
Peripherals connected to AV3
There are three possible ways to connect your Accessory Devices to the AV3
input.
& • In case of a peripheral with CVBS output, connect the video cable to the
video input of the TV.
• In case of a peripheral with S-VHS output, connect the video cable to the
S-VIDEO input of the TV.
• In case of a peripheral with component video cables, connect them to the
Pb, Pr and Y inputs AND also connect a video cable to the video input
(in order to have correct picture reproduction).
é Always connect the audio cables to the peripheral’s AUDIO L and R jacks
and to the
L AUDIO and R AUDIO AV3 jacks on the TV.
When you have a Digital Antenna cable connected to a digital Set top Box,
connect the Set top Box to the
AV4 IN VIDEO 2 Fh input.
Connect a Set top Box with 2 Fh RGB output to the H, V, R, B and
G jacks
and to the
L and R AUDIO jacks.
Connect a Set top Box with 2Fh Pr, Pb,Y output to the Pr, Pb and Y jacks
and to the
L and R AUDIO jacks.
See also the manual of your High Definition Set top Box.
Note:This television is designed to accept high definition signal standards 480p and
1080i, as specified by the Electronic Industries Association standard EIA770.3.
Set-top boxes from different manufacturers have the possibility of differing output
standards which may cause difficulties for the television to properly display.
Warning: in case you notice scrolling images, wrong colors or no color, no picture, or
even combinations of these on your screen, check if the connections are done in
the right way:
- for Y, Pb, Pr 2Fh: check if the cable colors match with the input connector colors
- for RGB-HV 2Fh: check additionally if the H and V cables are connected to the
respective H and V input connectors, and if necessary exchange
both connections.
AV4 Digital High Definition input
AV 3
IN
Pr
Pb
VIDEO
L AUDIO
R AUDIO
Y
S VIDEO
AV 4
IN
VIDEO 1080i - 2Fh
H
V
Pr
Pb
Y
/R
/B
/G
AUDIO
L
R
2080.2 am 28-05-2001 10:31 Pagina 33