Filter
Top Products
EN-10
NOTE D
When securing the VESA-compatible wall
bracket to your TV, use M4 bolts for 26 inch
models, M6 bolts for 32 inch models or M8
bolts for larger models (bolts not supplied).
4�3 Connect the antenna cable
Locate the 1. TV ANTENNA connector at
the back of the TV.
Connect one end of an antenna cable 2.
(not supplied) to the TV ANTENNA
connector. Use an adaptor if the antenna
cable does not fit
Connect the other end of the antenna 3.
cable to your antenna outlet, ensuring that
the cable is tightly secured at both ends.
Connect the mains cord4�4
WARNING B
Verify that your mains voltage corresponds
with the voltage printed at the back of the
TV. Do not insert the mains cord if the
voltage is different.
To connect the mains cord
Note
D
The location of the mains connector varies
according to TV model.
Locate the 1. AC IN mains connector at the
back or on the bottom of the TV.
Connect the mains cord to the 2. AC IN
mains connector.
Connect the mains cord to the mains, 3.
ensuring that the cord is tightly secured at
both ends.
WARNING C
Before you connect the TV to the power
outlet, ensure that the power voltage
matches the value printed under the cable
cover.
To easily disconnect the TV from the power
outlet, ensure that you have full access to
the power cord at all times. When you
disconnect the power cord, always pull the
plug, never the cable.
4�5 Insert the remote control
batteries
Note D
Remote control is not supplied. Purchase
remote control no. 22AV1105/10 from a
Philips authorized supplier.