Filter
Top Products
EN-21
EN
will be marked as 'SKIPPED' at auto
installation.
STEP TUNING •
Select YES
to enable tuning for each digit
entry.
DIGIT TIMEOUT •
Select 1 to
9�9 seconds for a channel
to switch to another channel. The
recommended and default setting is 3.0
seconds.
3 DIGIT TUNING •
Select YES to enable tuning up to 3-digit
channels.
AUTO SCART•
Select AVI (EXT1), AV2 (EXT2), ALL,
POWER SCART or NO.
AV1 •
Select the AV1
channel when a
scart cable is connected to the AV1
connector.
AV2 •
Select the AV2
channel when a
scart cable is connected to the AV2
connector.
ALL •
Select the respective channel when
a scart cable is connected to an AV
connector.
POWER SCART •
Switch on the TV from standby mode
automatically when a scart signal is
detected. Switch the TV to standby
mode automatically in the absence of a
scart signal.
NO •
Disable AUTO SCART feature.
ALWAYS RGB•
Select AUTO, AV1, NO_RGB or NO.
AUTO •
Allow RGB insertion in any sources.
AV1 •
Allow RGB insertion in AV1 (EXT1)
and other sources.
NO_RGB •
Disallow RGB insertion in any sources.
NO •
Allow RGB insertion in AV1 (EXT1)
only.
Video adjustment6�14
Enter 1. SETUP menu.
Press
2. ï to select CONFIGURATION >
VIDEO ADJUSTMENT.
VIDEO ADJUSTMENT
HORIZONTAL < >
VERTICAL < >
PHASE < >
CLOCK < >
AUTO ADJUST >
RESET >
Press 3. ï to select setting and Í Æ or Æ to
select options.
Set 6�15 energy saving
Enter 1. SETUP menu.
Press
2. ï to select CONFIGURATION >
ENERGY SAVING.
ENERGY SAVING
LOW POWER STANDBY FAST
ESP 1
SMART POWER LOW
Press 3. ï to select setting and Æ to select
options.