Philips 42HFL5850D Flat Panel Television User Manual


  Open as PDF
of 33
 
EN-23
EN
Clone configuration7
From USB to TV7�1
Copy TV configuration data from a USB stick
to TV.
Insert the USB stick to the USB connector 1.
at the side of the TV.
Enter 2. Setup menu.
Press
3. ï to select SETUP > CLONING/
UPGRADE > CLONING > USB TO
TV.
Press
4. Æ to enter USB TO TV.
Press
5. Æ to load data to the TV.
CLONING
USB TO TV >
TV TO USB >
Note D
• Duringtheprocessofcopying,donot
remove the USB stick.
• Allremotecontrolcommandand
control buttons on the TV are disabled.
Switch off and then on to reset the TV 6.
after cloning.
From TV to USB7�2
Copy TV configuration data from TV to USB
stick.
Insert the USB stick to the USB connector
1.
at the side of the TV.
Enter2. Setup menu�
Press 3. ï to select SETUP > CLONING/
UPGRADE > CLONING > TV TO
USB.
Press
4. Æ to enter TV TO USB.
Press
5. Æ to load data to the USB stick.
CLONING
USB TO TV >
TV TO USB >
Note D
• Duringtheprocessofcopying,donot
remove the USB stick.
• Allremotecontrolcommandand
control buttons on the TV are disabled.
Switch off and then on to reset the TV 6.
after cloning.
 previous next