Filter
Top Products
4
INSTALLATION
Positioning of the TV set
• Place your TV set on a solid base, strong enough to
withstand the weight of the set.
• Leave a space of at least 5 cm around each side of the
TV set to allow for proper ventilation.
• Do not place TV set near a radiator or other sources of
heat.
• Do not place TV set where it can be exposed to rain or
excesssive moisture.
Connecting the Aerial
• Insert the aerial plug into the socket at the rear of
the set.
Connecting to the mains
• Insert the mains plug into the wall socket. (For correct
mains voltage, refer to the type sticker at the rear of the
set.)
Note : This diagram is not representative of the actual
plug and socket.
Using the Remote Control
Battery Usage CAUTION - To prevent battery leakage
which may result in bodily injury or damage to the remote:
• Install ALL batteries correctly, + and - as marked on the
remote control.
• Do not mix batteries: (OLD and NEW or CARBON and
ALKALINE, etc.).
• Remove batteries when the remote is not used for a long
time.
Switching on the TV set
• Press the mains power button to switch on/off the TV set.
• If the set is on standby mode (indicator light is red), press
the Standby button on the remote control to switch on set.
5 cm
5 cm
5 cm