Filter
Top Products
English
39
Automatic presetting
Use automatic presetting to store or
reinstall all the preset radio stations.
1
FM / MW
START..
2
1 Press TUNER on the remote to select
“FM” or “MW”.
2 Press and hold PROG until "START ..."
appears.
➜All the former presets will be
overwritten.
Manual presetting
Use manual presetting to store only your
favourite radio stations.
1 Tune to your desired radio station (see
“Tuning to radio stations”).
2 Press PROG.
3 Press S / T to select a preset
number that you want to store the
current radio station.
4 Press PROG again to store.
Selecting a preset radio
station
● Press TUNER on the remote, then press
S / T to select a preset number
(or use the numeric keypad on the
remote).
➜The waveband, preset number followed
by radio frequency will appear.
Deleting a preset radio
station
1
In tuner mode, press S / T on the
remote to select a preset radio station.
2 Press and hold 9 until “FM/MW X
DELETED” appears.
➜“X” is the preset number.
➜The radio station continues to play but
has been deleted from the preset list.
➜The rest of the preset radio station
number remain unchanged.
Changing tuning grid (not available
for all versions)
In some countries, the frequency step
between adjacent channels in the
MW/FM band is 9 kHz/50 kHz (10 kHz/
100 kHz in some areas). The preset
frequency step in the factory is
9 kHz/50 kHz.
IMPORTANT!
Changing the tuning grid will erase
all previously stored preset radio
stations.
1 Press SOURCE to select “FM” or “MW”.
2 Press STANDBY ON to switch the
DVD system to standby mode.
3 Press STANDBY ON again to turn on
the DVD system and hold down S
button on the front panel.
➜The display will show "GRID 9" or
"GRID 10".
Helpful Hint:
– GRID 9 and GRID 10 indicate that the
tuning grid is in step of 9 kHz and 10 kHz
respectively.
Tuner Operations (continued)
DVD system’s
display panel