Filter
Top Products
67
Problem solving for programmed
recordings
PROBLEM SOLUTION
The DVD recorder is
not responding
bWhile a programmed recording is being made, you cannot operate your DVD recorder manually.
If you want to cancel the programmed recording, press STANDBY m .
'Switch off, timer
recording' flashes on
the TV screen.
bThe DVD recorder was switched on several minutes before the start of a programmed recording.
Switch off the DVD recorder using STANDBY m . A programmed recording (timer) will only
function if the DVD recorder is switched off ( STANDBY m button).
Error message: 'Insert
recordable disc'
bEither a disc has not been inserted or the disc cannot be used for recording. Insert a disc on
which recordings can be made. Switch off the DVD recorder using STANDBY m .
The error message
'Disc locked' appears
briefly on the screen.
bA write-protected disc has been inserted. Undo the write protection (see 'Preventing accidental
erasing of discs' in 'Manual recording') or insert a different disc.
Error message:
'Memory full'
bIf this error message appears after pressing TIMER , then all TIMER blocks are already
programmed. No more recordings can be programmed. Press the C button. If you want to clear
or check a programmed recording (TIMER block), select it with CH+ A or CH- B .
The 'Data error'
message appears on
the screen.
bThe data for the recording could not be transferred. Please check date, start time and end time
of the programmed recording.
The 'Collision'
message appears on
the screen.
bTwo programmed recordings overlap.
bIf you ignore this error message the show with the earlier start time will be recorded first. The
start of the second show will not be recorded.
bChange the setting for either of the two recordings.
bClear either of the two recordings
ENGLISH
Programming a recording (TIMER)